Wren Merlin

£0.00

Merlin is currently the largest turbine in our product family with a rotor diameter of 3.5m and a maximum power of over 2500watts. Merlin follows our proven and successful design philosophy and low wind speeds performance is key to this. On an installation site with a good average wind speed and little turbulence, Merlin is capable of providing most, if not all, of an average UK households power requirement. In some cases it may be appropriate to export any excess energy to the national grid via an export meter. Our Merlin turbine is real value for money and we are proud to bring a turbine of this capability, quality and low cost to the market. Payback times for this turbine are short, making micro-generation using small wind turbines an incredibly attractive proposition.

The Wren Micro-turbine will operate most efficiently when it is mounted high above obstructions in free flowing laminar airflow. Wren may also be roof mounted. But as with any roof mounted wind turbine, performance may suffer due to the inherent turbulence present at rooftop level. In optimum conditions, with an average wind speed of just 12mph, a single Wren Micro-turbine could generate as much as 40KwH per month of free and clean renewable energy. That represents a CO2 abatement of 18Kg’s per month.

If just 1000 Wren Micro turbines were in service, a potential 216,000 Kg’s of CO2 emissions would be prevented from reaching our atmosphere in a single year. Our larger products, Mistral & Merlin, have exponentially greater power capacity and will be able to make a significant or total contribution to your power requirements.

As worldwide energy prices continue to increase, the financial incentive to install a micro-generation system will become very significant!